Call us now (866) 522-0540
Search Icon Menu Icon
How To Measure and Cut-To-Size Policy | Close it

Cut-To-Size Items are Non-Returnable!

As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.

Measure Twice, Cut Once

Since custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.

How to Use a Measuring Tape

Extend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.

Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.

Features of a Measuring Tape: Sliding End Hook

The sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).


Nylatron<sup>®</sup> MC901 Heat-Stabilized Nylon Sheet

Nylatron® MC901 Heat-Stabilized Nylon Sheet

Polyamide, Nylon

SKU: NYLUC1 SH

Select your custom cut sizes:

  inches
  inches
  inches


ESTIMATED SHIPPING TO 06828: $28.76
* Prices are subject to change every 6 days
Login or Create an Account to Get As low as 0% for 30 days with

Description

Nylatron® MC901 is heat-stabilized cast nylon product with good mechanical and electrical properties. It is thermally stable up to 260?F even over extended periods of time. It sees use in both bearing and structural applications and is machined into wheels, gears, and custom parts. Nylatron® MC901 is blue in color.

  • Strong mechanical properties
  • Good electrical properties
  • Tough, strong material
  • Thermally stable up to 260?F

Product Reviews

Specifications

Material: NYLON
Specific Gravity (g/cc): 1.15 g/cc
Water Absorption: 0.60% @ 24 hrs.
Tensile Strength: 12000 psi
Tensile Modulus: 400 ksi
Flexural Modulus: 500 ksi
Flexural Strength: 16000 psi
Elongation: 20% @ Break
Izod Impact Strength: 0.4 ft-lbs/in.
Hardness: R115
Compressive Strength: 15000 psi
Compressive Modulus: 400 ksi
Limiting Pressure Velocity: 3000 psi-ft/min.
Heat Deflection Temp: 200?F
Melting Point: 420?F
UL94 Flammability: HB

Frequently Asked Questions

Why should I buy from Interstate Advanced Materials?
We've been in the Plastic business for decades and maintain a quality stock of all types of plastics and accessories, shipped quickly to you.

What is Interstate Advanced Materials's Shipping Policy?
Shipping will vary based on whether your order contains custom or cut-to-size products. Details about shipping can be found here.

Is Interstate Advanced Materials site secure?
Absolutely. Your information is passed through our https site when you make a purchase. Your Credit Card is never stored on file.



WARNING: This product can expose you to chemicals including N,N-Dimethylformamide, CAS 68-12-2, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Material Warning WARNING: This product can expose you to chemicals including METHYLPYRROLIDONE, CAS 872-50-4, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Disclaimer: Interstate Advanced Materials makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.