×
How To Measure and Cut-To-Size Policy | Close it
Cut-To-Size Items are Non-Returnable!
Cut-To-Size Items are Non-Returnable!
As per our Shipping and Returns Policy, custom cuts and fabricated parts are non-returnable. If you need an over- or undersized item, note it under \"Comments\" during Checkout. Cut-to-size orders have an acceptable cut tolerance of 1/8" (0.125"), so clarify if the adjustment is to be made on the (+) or (-) side of the saw blade. Please review our full return and shipping policy here.
Measure Twice, Cut OnceSince custom cuts and fabricated parts are non-refundable, be very careful while measuring your dimensions. As each cut is nominal, even the slightest miscalculation could be costly.
How to Use a Measuring TapeExtend your tape measure several inches to find the 1 and 2 inch markers. In between the inch markers you’ll find 16 equally spaced tick marks.
Measure by counting the increments beyond the nearest inch. As the increments decrease, so does the length of the mark. For example, 1/2\" has a bigger mark than 1/4\" which has a bigger mark than 1/8\". The smallest mark follows at 1/16\". Please be aware that some measuring tapes may have even smaller increments.
Features of a Measuring Tape: Sliding End HookThe sliding end hook is designed for two different types of measurements. An outside measurement (where the hook of the tape hangs over an edge), requires the hook to slide out a bit to account for the thickness of the material. When making an inside measurement (where the hook will push up against a surface), the clip slides in, again, accounting for its thickness. The measuring tape self-adjusts to guarantee an accurate measurement (as far as the tape is concerned).
DURATRON® PAI SHEET
High-performing, Amorphous Plastic That Features Excellent Resistance To High Temperatures.
SKU: PAIBC SH
ESTIMATED SHIPPING TO 43085: $28.88
Description
Duratron® PAI is a high-performing, melt-processing amorphous plastic that features excellent resistance to high temperatures. Duratron® PAI survives extreme weather conditions including continuous temperatures up to 500F (260C). Duratron® PAI's extremely low coefficient of thermal expansion and elevated creep resistance offer excellent dimensional stability. With versatile performance capabilities and availability in extruded, injection molded and compression molded grades, Duratron® PAI has proven use in a broad range of industries and applications. Parts machined from Duratron® stock shapes provide greater compression strength and higher impact resistance versus most advanced engineering plastics. Benefits of Compression Molded Grade For large shapes or custom geometries like tubular bar, compression molded Duratron® PAI shapes offers customers the greatest cost-efficiency and flexibility. Another benefit of selecting a compression molded grade is that resins are cured, or "imidized" prior to molding which eliminates the need to post-cure shapes or parts fabricated from compression molded shapes.
Popular extrusion and injection molded grades of Duratron® PAI are offered as compression molded shapes. (Note: Compression molded grades are usually identified as having a second digit of "5" in the product name.)
- Maintains strength and stiffness to 500F (260C)
- Minimal expansion rate to 500F (260C)
- Excellent wear resistance in bearing grades
- Able to endure harsh thermal, chemical and stress conditions
Frequently Asked Questions
What sets Interstate Advanced Materials apart?
Interstate Advanced Materials empowers customers to choose their pricing by maintaining a membership, available through tier levels that unlock access to exclusive pricing as well as shipping and volume discounts
What is Interstate Advanced Materials's Shipping Policy?
Shipping will vary based on whether your order contains custom or cut-to-size products. Details about shipping can be found here.
Is your site secure?
Yes, we implement a variety of security measures to maintain the safety of your personal information. Your information is protected both online and offline.
Disclaimer: Interstate Advanced Materials makes no representations about any of its products that are modified in any way after they leave its possession, nor do its representations apply when any of its products are improperly used or stored. Each customer of Interstate Plastics bears full responsibility for making its own determination as to the suitability of each material, product, recommendation or advice provided by Interstate Plastics. Each customer of Interstate Plastics must identify and perform all tests and analyses necessary to assure that its finished parts incorporating materials from Interstate Plastics will be safe and suitable for use under end-use conditions.
